|
|
See! Diagnose! Cure!
Automatic Exposure Control Sensors (Claymount)
SSMC 601 (Telamat XB3)
The Claymount SSMC 601 is a solid state measuring chamber, built of special developed, cost effective material, intended to measure the dose of x-rays used in real time operation within the Medical Radiology, Oncology and Chiropractors.
Features
- Invisibility.
- Little absorption.
- Highly efficient.
- Scatter free.
- Mechanically stable.
- Very reliable.
- User friendly.
The SSMC 601 is placed between the patient and the imaging device (film, detector) in order to detect the actual dose value for the automatic exposure control (AEC) an error free image is guaranteed even at low kV. Its attenuation factor is very low.
X-ray scattering has been brought back to the bare minimum, to improve the brightness of the image. Its design and reliability has proven itself in the installed base of 30.000 units within today’s toughest radiology environments and will meet the strongest requirements of tomorrow.
Technical data SSMC 601
| Number of measuring fields | 3 |
| kV range | 40-150 kV |
| Exposure time range | < 1ms-5s |
| Sensitivity typ. at 80 kV, 25 mm Al | 1.3 nA/µGy/s |
| Sensitivity tolerance from chamber to chamber | ≤25% |
| Sensitivity tolerance between measuring fields | ≤10% |
| Attenuation factor as per DIN 6811, part | ≤1.05 |
| Operating temperature | +10 - +40° C |
| Storage temperature | -20 - +60° C |
| Humidity | 35-85% (non condensing) |
| Atmospheric pressure | 860-1060 hPa |
| Mounting orientation | Any |
| Degree of protection | Ordinary equipment |
| Weight | 950 g |
| Plug Pinout |
| Field I (center) | Pin 1 and 6 |
| Field II (left) | Pin 2 and 5 |
| Field III (right) | Pin 3 and 4 |
| Shield | Gnd |
Dimensions of SSMC 601 (Telamat XB3) »
Explanation of the information and advertising nature of the information posted on the site.
Dear visitors of our site. All information contained on the site is for informational and advertising purposes only. The information provided on the site is not exhaustive.Technical specifications may be changed or supplemented at any time.
This information cannot be used as official document, for example, for the preparation of the technical part of the tender documentation.
For more information, contact our experts. Contact Us >>
|
